Wood Auger Drills
H.H.S. All styles
ship, pole, double & single spur,
barefoot, brad point.

From 1/8" to 2" Diameters.
**Lengths up to 24"
Also Metric sizes!

Hand Brace Bits


TO 2" DIAMETER

Double spur machine bits


double spur tip

"Power Plus Eliminator"
powerful heavy duty
CARBIDE TIP wood auger drills



carbide tipped with hardened spur,

Best for soft or hard woods,
fiberglass, composites,
heavy green woods,
For forestry, home builders,
Timber Framing, treated woods,
Sea wall construction,
underwater construction, Utilities', Landscaping.

No walk-out or wandering.
Clean Entry & Exits!

USE WITH ELECTRIC, AIR OR GAS POWERED DRILL MOTORS
THE LEAD SCREW, CARBIDE, AND SHANK ARE REPLACEABLE AND CAN BE COMPLETELY REBUILT!

Socket, SDS, Splined
& Standard Shanks!

The Eliminator
WILL out-perform all other augers!

1/2" * 9/16" * 11/16" * 13/16" *
15/16" * 1" * 1-1/16"
* 1-1/8" *to 3"diameters
up to 72" lengths

7/16", 5/8", Hex Shanks,
3/4 (Round), (socket, SDS, or spline)

special sizes made for your needs!

"Timber Bits"
9/16" to 1-1/8" Diameters
30" & 40" lengths

"Ultimate Penetrator "
Heavy Duty
CARBIDE TIP Wood auger Drills



Power auger flute design
gives the Penetrator the ability
to drill faster than ordinary steel augers.
Milled from a solid piece of steel.
Because of it's rugged construction
and tip design.
The Penetrator is able to accept
the high torque and high R.P.M.loads
generated by today's most powerful
drills & impact wrenches.

9/16" * 11/16" * 13/16" * 15/16"
* 1-1/16" * 1" * 1-1/8" *to 3"diameters
up to 72" lengths

for treated or green lumber , or forestry
Socket, SDS, Splined, & standard Shanks

(Sleeper) Bits
Carbide Tipped
for railroad ties and heavy wood
1/2" to 1-1/16" diameters- 22" lengths
Socket, SDS, Splined & Standard Shanks!


Optional Tip
Special sizes made!
For Railroad Ties and heavy timbers

Heavy Duty
FISH TAIL


* Carbide Tip*
For power Feed
Quick Chip Removal and Clean Holes at high rpm's
for
Hard Woods* Treated Wood* Plastics * Fiberglass*
Bit Pictured 1-3/4 " X 9" 3/4"
ALL SIZE BITS MADE TO ORDER

Reduced Shank Bits
Carbide ,Cobalt, HHS, Titanium,
1/8"*1/4"* 3/8"* 1/2" Diameter shanks
Brad Point, Plexi Point, Tapered, Standard, & Stepped.
Standard, Numbered, Decimal, Lettered, and Metric

Planetor (wing bits)
7/8" to 2-3/4" diameters
6" to any length.

Hex Shank and Quick Loc bits
all sizes.

Brad point
"Fish Tail Bit"

1/8" to 1/2" dia.
Extra Long Brad Points

Three Wing counter bores
Carbide Tipped
Designed for Large and deep hole
aggressive timber & frame drilling.
Up to 5" diameters, up to 10' Ft. lengths


Multi -Cutter Tooth Counter bore / Drill
Railroad Ties
Plastic Coated ,Treated ,as well as Green Timbers.
Both Counter bore and tip are carbide.
Made to order sizes, for both length and diameter

Circle hole Cutters
to 8" diameter


Adjustable Spade bits
adjust from 7/8" to 5"diameter


Super Rotary Saw Bits
Hi- Moly tool steel,
non grabbing roller point.
Excellent for roto-zip.
Now a drill that works like a saw!

Countersinks
Fixed & Adjustable
all sizes standard and metric

complete sets


Multi Step Bits
1/8" to 1-1/2" dia.

Counter bores
all sizes up to 1-1/2"


Counter-Bore & Bits
2-1/4* 3-1/4 diameter
bits
9/16 * 11/16 * 13/16


Adjustable Carbide Tip Counter bores


Countersinks & counter bores
Carbide tip

"Fireball? Bits
Heavy duty
Socket, SDS, spline & standard Shanks
9/16 to 1-1/16 Dia
to 48" lengths
Special sizes Made!

Flex bits
self feeding ,hole at tip
1/4" to 1" dia..
lengths to 72"


Long boy bits
(up to 72"in length)
standard ,metric, numbered,& decimal
all diameters

Drill Index's
from .020 to 2".
Metric and standard.

Drill Stops
all sizes


Mini Planes. Bull Nose, & Scraper


Sanding Drums

Wood Carving Sets



Wood Rasps
Rifflers, Italian, and Artisan. Micro

Clam Shell- Forstner bits


Standard
1/4" to 3-5/8"dimeters
Metric
10mm to 50mm diameters



Sets 7,and 17 Pc
1/8" to 2-1/8 " diameter.
carbide tipped,
also titanium coated

Thomas Flinn British Series Saws
All Styles

Hole Saws
standard and metric
Carbide Tipped & Bi metal
9/16"to 24" diameters
unlimited depths.

"Vix" Bits
(Door & cabinet hardware installation bits)
all sizes!

Carbide Hole Cutter Bits

Power chuck System
for all lathe work

Mortise Chisels & Bits
( Square holes )
1/4"-5/16"-3/8"-1/2"-5/8"-3/4"-1" sizes


Mortise Chisel Jig kit
for Drill Press

All (Dowel) Plug Cutters
(self ejecting)
1/4 to 2" dia..



Four Flute Plug Cutters
1/4" to 1-1/2"
Metric
8mm,10mm,12mm,13mm,
14mm,15mm,16mm
4 flute plug cutters


Tenon /plug cutters
3/8" to 2" diameters 6-1/4 depth

Plumb & multi-Spur Bits,
1" to 4-5/8" diameters


EURO BORING BITS
5/8" TO 2-1/8"

MULTI-SPURRED
WOODPECKER BITS

1/4" to 4 5/8" diameters
Special larger sizes made.

All Router Bits
carbide and Diamond tipped

12 PC SET
carbide
1/4 or1/2 shanks
set includes:
flush trim, dovetail, "V' groove, core box,
roundovers, cove bit, chamfer bit,
roman ogee.
Spade (Paddle) Bits
up to 1-1/2" Diameters



Plexi point Bits
Specially designed bits for
Plexiglas, poly ,fiberglass gel coats,&carbon piles
Fractions, letter, numbered, metric
all diameters

Hand Held Tenon Cutters
3/4" to 3 " diameter tenons
can cut up to 5 1/2 "diameter logs
1/2" & 3/4" shanks
single and double blades



60 & 45 degree angle
tenon cutters.
Cuts 1" to 3 " diameters
to handle up to 8"diameter posts

Countersinks
provide opposite angle for tenons

industrial stationary mounts




Motor & stands for tenon cutter

Threaded Shanks
(1/4-28 & 7/16-14)
number ,letter, fractional,& metric
standard, Plexi point, tapered, brad point



for CN & CNC boring machines. RH-LH Carbide

Adjustable Carbide tip Boring Bits

adjust from 1-3/16" to 3-1/8"


Stepped Bits
all sizes and configurations
and made to your specs.

Bench Top Mortiser
1/2 HP motor- 2Yr warranty

earth & snow augers
All size and length carbide tipped

Carbide Tooth Saw Blades
The highest Quality European blades
Made in Germany
Diameters
7-1/4" to 14"
220mm to350mm
24 to 100 tpi

Dado Blades 8"
Adjustable, Stackable, Standard

Wood Lathe Turning center
10" diameter turning
15" between centers
extension mount
allows up to 39" between centers
1/2 hp motor,
2-1/2" tailstock spindle,
6 speeds from 500 rpm to 3700rpm.
sealed bearings
2 yr warranty